Tecno Spark 6 Go (3/64 KE5J) Stock Rom 100% Tested CM2

Advantages Of Tecno Spark 6 Go Stock ROM

⇒Stock ROM will solve Tecno Spark 6 Go hanged on the logo problem.
⇒Flashing stock firmware will solve the restart loop on Tecno Spark 6 Go.
⇒Unbrick and dead recover by flashing stock ROM on Tecno Spark 6 Go.
⇒Flash Stock ROM to Unroot, Upgrade, and Downgrade Tecno Spark 6 Go.
⇒Flash firmware to get back in Stock condition and gain warranty again.
⇒Stock Rom will solve if any app unfortunately has stopped working on Tecno Spark 6 Go.

PRE-Requirements:

1. Laptop or PC (Running on Microsoft Windows)
2. Good quality USB Data Cable
3. MediaTek (MTK) USB Drivers
4. CM2MT2
5. DA File For CM2MT2
6. Stock ROM for Tecno Spark 6 Go

How To Flash Tecno Spark 6 Go Using CM2 Dongle?

1. First, you need to download and install MTK (MediaTek), USB drivers.
2. Download and extract Stock ROM.
3. Download and install CM2MT2 Module.
4. Connect CM2 dongle with PC and launch the CM2MT2 module.
5. Select the Boot files for Tecno Spark 6 Go then go to the Flash tab and select the firmware
6. Click on the Flash button, Now connect the phone with the PC via USB cable, the phone should be powered off.
7. The flashing process will be started, Wait until flashing is completed, and don't disconnect the phone during the process.
8. After flashing, disconnect the USB cable, power ON, and enjoy.

Disclaimer: infinityrom.com is  not responsible for any damage caused to your phone. Please backup you phone firmware and important user data before flashing. Your all user data will be erased during flashing procedure. This file is 100% tested by me. Don't flash this file on others phone.

Firmware Details And Link

Brand Name: TECNO

Model Name: Spark 6 Go

CPU Name: MediaTek

CPU Type: MT6761

Android Version: 10

SW: KE5j-H6122AB

Build: 201016V149
Preloader: preloader_ke5j_h6122.bin (225KB)

Password⇒ infinityrom.com
File Type: ZIP
Links: MediaFire

File Size: 2.33GB