QMobile i6 Metal One v2 SPD One Click FRP Remove Without BOX

Download Required Files

ADB Drivers For PC
FRP Remove Commands

How To Remove QMobile i6 Metal One v2 FRP (Google Account Verification)

  1. After downloading, extract and install ADB drivers on your PC or Laptop (Skip this step if already installed).
  2. Extract and install ADB_Fastboot_v1.4.2 on your PC. Turn off your phone and remove battery.
  3. Boot your phone into Recovery mode by holding Volume UP + Power button then choose Reboot To Bootloader option.
  4. Now your phone is in Fastboot mode. Connect phone with PC via USB data cable. PC will detect ADB mode if phone is connected successfully.
  5. Open "Minimal ADB and Fastboot" from desktop OR go to this directory (C:\Program Files (x86)\Minimal ADB and Fastboot) and enter below commands one by one.
  6. Write fastboot devices and press enter key, after that write fastboot erase persist and press enter, finally write fastboot reboot and press enter key.
  7. Congratulations! your device will reboot in normal mode and now you don't need Google Account Verification.  

No comments