QMobile X700 Pro 2 Flash File MT6580 100% Tested Scatter

Firmware Information

Device Brand   : QMobile
Device Model   : X700_PRO_II
Device CPU     : MT6580
Device IntName : X700_PRO_II
Device Version : 6.0
Device Compile : 11/17/2016 4:06:53 AM
Device Project : ALPS.W10.24.p0
Device ExtInfo : QMobile X700 PRO II

How To Flash QMobile X700 Pro 2 Without BOX?

  1. First you need to download and install MTK USB drivers (MTK Drivers).
  2. Download and extract Stock ROM.
  3. Download and extract SP Flash Tool and open it.
  4. Within SP Flashing Tool, locate Scatter file from Stock ROM folder.
  5. Now click on download button.
  6. Remove and insert battery again in mobile and connect USB data cable.
  7. Flashing process will start. Be patient until green passing icon appear.
  8. After flashing disconnect USB cable, remove and insert battery again in mobile then power on and enjoy.
Solved QMobile X700 Pro 2 hanged on logo, Solved QMobile X700 Pro 2 unfortunately has stoped, Solved QMobile X700 Pro 2 restart loop.
Note: We are not responsible for any damage caused to your phone. Backup firmware before flashing.

Flashing Info By CM2

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A484147346132A41DB1E13F9355
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , 2a4GA
[eMMC] : FLASH_CID : 90014A484147346132A41DB1E13F9355
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID    : 0x1893739E04ABF06522BEE45F99C49427
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6580 , Project : v2600 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify :  Enabled
Setting : HW verify :  Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!

BL : BatteryLevel : 3814 mV
BL : BatteryLevel Ok

BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000001C80000-0x0000000003320000
Erase : 0x00000000050A0000-0x00000003A52E0000
Flash Pre-Erase Done, time used : 00:00:00

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_v2600.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0014
Update PMT by user request
Repartition Done!
Use FLN Mode

Processing : Flash Write
Flash now : LK
Image Flash Ok
Flash now : BOOT
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : SECRO
Image Flash Ok
Flash now : SYSTEM
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USERDATA
Image Flash Ok
Flash Write Done, time used : 00:05:57

Processing : Verify
Verify Passed : LK
Verify Passed : BOOT
Verify Passed : RECOVERY
Verify Passed : LOGO
Verify Passed : SECRO
Verify Passed : SYSTEM
Verify Passed : CACHE
Verify Passed : USERDATA
Data Verify Done, time used : 00:00:48

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:07:04
Reconnect Power/Cable!

Download Link

Password  infinityrom.com
File Type: ZIP
File Size : 1.32GB
Links : MediaFire

No comments