LG G2 LS980 Unbrick Qualcomm 9008 Mode 100% Tested Method

Advantages Of LG G2 LS980 Stock ROM

⇒Stock ROM will solve LG G2 LS980 hanged on the logo problem.
⇒Flashing stock firmware will solve the restart loop on LG G2 LS980.
Unbrick and dead recover by flashing stock ROM on LG G2 LS980.
⇒Stock ROM will fix LG LS980 secure booting error.
⇒Stock ROM will fix if LG G2 LS980 Can't get into Download Mode.
⇒Flash Stock ROM to Unroot, Upgrade and Downgrade LG G2 LS980.
⇒Flash firmware to get back in Stock condition and gain warranty again.
⇒Stock Rom will solve if any app unfortunately has stopped working on LG G2 LS980.


  1. Laptop or PC (Running on Microsoft Windows)
  2. Good quality USB DATA Cable
  3. Qualcomm USB Drivers
  4. LG Phone USB Drivers
  5. LG G2 LS980ZV7.TOT File
  6. LG G2 LS980 DLL File
  7. BoardDiag v2.9 Tool
  8. LG Flash Tool v1.8

How To Unbrick LG G2 LS980 And Get Back Download Mode?

  1. Install Qualcomm USB Drivers on your PC first.
  2. Download and extract LS980ZV7.TOT
  3. Download BoardDiag Tool and extract it.
  4. Connect phone with PC via USB cable and open BoardDiag tool, Go to the Image Extraction area locate LS980ZV7.TOT file and location where the TOT file will be extracted.
  5. Select AP Chipset G2 (MSM8974) then select the correct COM Port and Target Directory (TOT Extracted location).
  6. Now select AP Check, Emmc Test, and SDRAM Test and click on Start Button, Unbricking process will start, Once the process is done Test Completed message appears and the phone will reboot automatically. Now you can boot your phone into Download Mode.
  7. How To Flash Stock ROM on LG G2 LS980?

  8. Download and install LG Phone Drivers on your PC. 
  9. Download LG Flash Tool, G2 LS980 DLL file, and LS980ZV7.TOT file.
  10. Open LG Flash Tool, select the LS980 DLL and  LS980ZV7.TOT file and click OK.
  11. Now click on the Start button and connect the phone with PC in download mode, power OFF phone, For Download mode⇛ press and hold the Volume+ button then insert USB data cable with the phone.
  12. The flashing process will start, wait until flashing complete.
  13. Once all done, the phone will restart automatically and enjoy freshly installed stock firmware on your LG device.
Disclaimer: infinityrom.com is  not responsible for any damage caused to your phone. Please backup your important user data before flashing. Your all user data will be erased during flashing procedure. This method is 100% tested and working.

No comments