Samsung S4 Clone GT-I9500 MT6572 Flash File 100% Tested Scatter
Advantages Of Samsung Clone S4 Stock ROM
⇒Stock ROM will solve Samsung Clone S4 hanged on the logo problem.⇒Flashing stock firmware will solve the restart loop on Samsung Clone S4.
⇒Unbrick and dead recover by flashing stock ROM on Samsung Clone S4.
⇒Flash Stock ROM to Unroot, Upgrade, and Downgrade Samsung Clone S4.
⇒Flash firmware to get back in Stock condition and gain warranty again.
⇒Stock Rom will solve if any app unfortunately has stopped working on Samsung Clone S4.
PRE-Requirements:
- Laptop or PC (Running on Microsoft Windows)
- Good quality USB Data Cable
- MediaTek (MTK) USB Drivers
- SP Flash Tool For PC
- Stock ROM for Samsung Clone S4
How To Flash Samsung Clone S4 Without BOX?
- First, you need to download and install MTK (MediaTek) USB drivers.
- Download and extract Stock ROM.
- Download and extract SP Flash Tool and open it.
- Within SP Flashing Tool, locate a Scatter File from the Stock ROM folder.
- Uncheck the preloader partition, and click on the download button.
- Remove and insert the battery again in the phone and connect the USB data cable.
- The flashing process will start. Don't disconnect the phone during the process, Be patient until a green OK icon appear.
- After flashing, disconnect the USB cable, remove and insert the battery again into the phone then power ON and enjoy.
- To get back the Samsung logo, open the dialer and dial *#0066#
Disclaimer: infinityrom.com is not responsible for any damage caused to your phone. Please backup you phone firmware and important user data before flashing. Your all user data will be erased during flashing procedure. This file is 100% tested by me. Don't flash this file on others phone.
CM2 Read Info
Chinese Miracle II [MTK module] v 1.58
Operation : Read Flash [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 17 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E3958524D420042075F48C083
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMRX9
[eMMC] : FLASH_CID : 1501004E3958524D420042075F48C083
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x0000000070000000
[eMMC] : FLASH_UCP : 1792 MiB [eMMC 2 GiB]
DEV RID : 0x1893739ECD8564D36F4233798FC222B4
INT RAM : 0x00020000
EXT RAM : 0x10000000 [256 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
Brand : alps
ProdName : mtk6589_wet_lca
ProdModel : GT-I9500
Device : mtk6589_wet_lca
AndroidVer: 4.2.2
MTKxCPU : MT6589
MTKxPRJ : ALPS.JB3.MP.V1.8
[Read Ok] : preloader_benrui72_wet_lca.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6572 / V1.1.1 / benrui72_wet_lca / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 513 MiB
Scatter saved to : D:\MT6589__alps__GT-I9500__mtk6589_wet_lca__4.2.2__ALPS.JB3.MP.V1.8\
All done!
Done!
Elapsed: 00:03:10
Reconnect Power/Cable!
Firmware Details And Link
Brand Name: Samsung Clone
Model Name: S4 GT-I9500
CPU Name: MediaTek
CPU Type: MT6572
Android Version: 4.2
Preloader: preloader_benrui72_wet_lca.bin (95.9KB)
Preloader: preloader_benrui72_wet_lca.bin (95.9KB)
File Type: ZIP
Links: MediaFire
Links: MediaFire
File Size: 338MB
Password⇒ infinityrom.com
Post a Comment