TECNO Spark 5 Pro KD7 MT6765 FRP Reset Free Without BOX

FRP means Factory Reset Protection, FRP is the latest security feature on Android phones. When you factory reset, your phone asks for a google account that was previously synced on your phone. No other person can use your phone easily after resetting it unless he remembers your google account.
Inside this post, you will learn how to remove or reset the FRP lock on the TECNO Spark KD7 smartphone that has a MediaTek processor, Android 10, and a non-removable battery. Note that this method is 100 percent tested by me on TECNO Spark KD7. Kindly read the instructions and apply them carefully. Before starting the procedure, you will need to download the following stuff.

Pre-Requirements To Remove FRP Lock TECNO Spark KD7

Begin Address = 0x1888000
Format Length = 0x100000

How To Reset TECNO Spark KD7 By Using SP Flash Tool?

  1. Download and install MTK (MediaTek) USB Drivers on your PC (Skip this step if already installed).
  2. Extract and open SP Flash Tool on your PC.
  3. Within SP flash Tool, Go to Download Tab and select Download-Agent and Scatter-Loading File.
  4. Now go to Format Tab and select Manual Format Flash option, put Begin Address and Format Length as shown as in the screenshot.
  5. Now click on the Start button, Connect phone with PC via USB data cable (Phone Should be power OFF), When Format OK box appears then disconnect the phone. Now FRP removed done.
Note: This method is 100% working and tested by me. Do not try this method on other phones. Kindly read above instructions carefully. infinityrom.com is  not responsible for any damage caused to your phone.

No comments