Samsung Note 8 SM-N950U FRP Remove Binary 6 Free 100% Tested

In this tutorial, you will learn how to remove FRP (Factory Reset Protection Or Google Account Verification) on Samsung Note 8 (Running On Android Pie 9.0) by using Windows PC or Laptop.
Before starting FRP removing procedure, you will need to download and install the following stuff that is given below. This method is 100% working.
1- Samsung USB Drivers
2- Odin Tool (Samsung Flashing Tool)
4- Note 8 SM-N950U Stock ROM N950USQS6DSG5

How To Remove Note 8 SM-N950U Via Odin - Complete Guide

  1. To reset the FRP of Note 8 SM-N950U you must have binary 6 firmware installed on your device.
  2. Install Samsung USB drivers on your PC (Skip this step if already installed).
  3. Make sure the phone battery must be charged at least 50% before flashing.
  4. Power off your device and boot into Download Mode. Press and hold the Volume Down+UP button at the same time and insert a USB cable to the phone, Release all buttons when a warning sign appears then press the Volume Up button to continue.
  5. Extract Odin software and launch it, Odin will recognize your device.
  6. Now you need to flash the Combination file first, Click on the AP or PDA (According to Odin Version that you use) button and select COMBINATION_FA71_N950USQU6ASG1.tar file then click on the Start button. When the Green Pass message appears, the phone will reboot automatically.
  7. Now Your phone is in Factory Binary Mode.
  8. Connect your phone with PC in Download Mode, Open Odin tool, and write flashback to Stock ROM (Original Firmware). Click BLAP, and CP buttons and select the .tar file from the Stock ROM folder Leave the CSC file and click on the Start button.
  9. After flashing, the phone will reboot in normal mode, Go to the settings tab the build numbers 7 times, Go to developer option, On OEM lock and factory reset the phone or Flash the only CSC file, now you don't need any Google Account Verification. FRP is successfully removed.

No comments