QMobile l12 PRO BizMaster RDA8851 Flash File 100% Tested Bin

How To Flash RDA Keypad Phone

  1. First of all, you need to download and install RDA Drivers Pack on your PC (skip this step if already installed)
  2. After that, you need to download QMobile l12 PRO RDA8851 Flash File, the file should be in ilod or Bin format.
  3. Use  CM2RDA or Miracle flashing tool for flash ilod or Bin file.
  4. Open the CM2RDA module or Miracle tool and go to Flash Tab, select a flash file, and then click on the Write button.
  5. Now Powered Off your phone, Insert USB cable, Wait when device show Charge icon, When device show StorageMode: Press 0 button for a 5 second!  BOOT Done.
  6. The flashing process will start, wait until the flashing process is done.
Note: Please backup firmware and important user data before flashing. Your all user data will be erased during flashing procedure. We are not responsible for any damage caused to your phone. Don't flash this file on other phone. This file is 100% tested by me

CM2 Readed Info

Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.03

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR

Operation : Read Flash [ v1.03 ]

----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00600000
BOOT_INIT : 0x81C0024C
Setting BOOTROM mode
Boot_CPU  : 0x88094009 : [RDA] : RDA8851CL
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x161660C8 : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
Boot IV  : 0xFBA2A2E0
Boot done!

Read done, 0x00400000

Verify FlashContent
MCU verified
CAL verified
FAC verified

Device Info Details :
[0] : X9B
[1] : 8809
[2] : CT8851B
[3] : pasw_rda6625
[4] : flsh_spi32m
[5] : gc9106/st7735r/gc9102/NV3021/gc9108/gc9104
[6] : byd3A01/gc6123/gc6113/gc6133/byd3a02serial/sp0821/pas6175/sp0829/gc6153_x
[7] : rdabt_8809
[8] : rdafm_8809
[9] : 20190921Sat1704
[10] : OT_L12_PRO_Qmobile_HSD7735XL91049106BOE9108_BYDGDSP_EnFrArPeUd_190921


Firmware Info And Link

Device Name: QMobile
Model Name: L12 Pro
CPU Type: RDA8851B
Boot Key: 0
Flash File Format: ilod and Bin

No comments