CALME C5000 SPD6531E Flash File 100% Tested BIN

How To Flash SPD Keypad Phone Using CM2 SCR Module

1. First of all, you need to download and install SPD Drivers Pack on your PC (skip this step if already installed)
2. After that, you need to download CALME C5000 Flash File, the file should be in Bin format.
3. Use  CM2SCR or Miracle flashing tool for flash Bin file.
4. Open the CM2SCR module or Miracle tool and go to Flash Tab, select a flash file, and then click on the Write button.
5. Now Powered Off your phone, Insert USB cable Press and hold BootKey or use BootCable.
6. Once the device connected successfully, The flashing process will start, wait until the flashing process is done.

Note: Please backup firmware and important user data before flashing. Your all user data will be erased during flashing procedure. We are not responsible for any damage caused to your phone. Don't flash this file on other phone. This file is 100% tested by me

CM2 Read Info

Operation : Read Flash [ v1.03 ]

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

BootSource  :  InternalLibrary

BootVersion : Infinity SCR SC6531E Loader v 1.2

Port speed : 921600

FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Ok, 4194304 bytes

Saved to : D:\Firmware\China\Callme\SPRD_SPI_WINBOND_W25Q_4MiB.bin

Done!

Elapsed: 00:00:55

Firmware Info And Link

Device Name: CALME

Model Name: C5000

CPU Name: SPD

CPU Type: SPD6531E
Boot Key: Use Boot Cable

Flash File Format: Bin

File Type: ZIP

File Size: 3.64MB

Password⇒ infinityrom.com

Link: MediaFire