Itel Magic 2 IT6131 PAC File 100% Tested

PRE-Requirements:

  1. Spreadtrum (SPD) USB Drivers
  2. SPD Upgrade Tool
  3. Stock ROM for Itel Magic 2

How To Flash Itel Magic 2 Without BOX?

  1. First of all, you need to download and install SPD USB Drivers on the PC,  if already installed skip this step.
  2. Now you need to download Firmware (Stock ROM) PAC flash file for your phone.
  3. Download and Extract SPD (Spreadturm) Flash tool. After extracting open it.
  4. Within the Spreadtrum Upgrading Tool click on the setting icon and upload the PAC flash file. You will see a blue line filling at the bottom of the flash tool.
  5. When the file is uploaded, click on the Start button, Turn off your phone and connect the USB data cable while holding (Boot Key).
  6. The flashing process will be started, wait until the Green Passed message appears. 
Disclaimer: infinityrom.com is  not responsible for any damage caused to your phone. Please backup you phone firmware and important user data before flashing. Your all user data will be erased during flashing procedure. This file is 100% tested by me. Don't flash this file on others phone.

CM2 Read Info

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Spreadtrum Boot Block version 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q64 : 0x00800000 [ 8MiB ]

Read Flash Ok, Size : 8.00 MiB

Platform Version: MOCOR_12C.W13.04.14_Debug
GC2426_it6131_64X64_240X320BAR_EnUr_PK
Project Version:   it6131-GC2426-EnUr-PK-20200309
MMI Version:       it6131-GC2426-EnUr-PK-20200309
BASE  Version:     BASE_SVN
HW Version:        fp6531_bar
03-09-2020 18:03:26
LOG Version:      V1.0.1

Firmware Info And Link

Device Name: ITEL
Model Name: IT6131
CPU Name: SPD
CPU Type: SPD6531C
Boot Key: Call+OK+Left
Flash File Format: PAC
File Type: ZIP
File Size: 6.33MB
Password⇒ infinityrom.com
Link: MediaFire

No comments